What are the Most Common Types of Foundation Repair?
Of all the home repairs a homeowner might have, the most petrifying home repair is a problem with the house foundations. If you need to replace your roof, it is not that hard; but the foundation is literally a whole different side. After all, the foundation is the main support of your house. When it comes to this problem, it is usually caused by one thing -water. And, this is the main reason why it is indeed necessary for you to ask the help of Foundation Repair Contractors when you are addressing this issue.
Moreover, the methods used in repairing the foundations may vary, this depends on the site condition and geographic area for the repair. Until the late 1970s came, concrete is the most used simple method for the repair. So, below is a list of some most used and common foundation repair in these days.
First is the Helical Piers. Helical Piers are made for exterior foundation repair and interior slap repairs. Helical Piers are truly helpful for both new construction and as foundation repair method. Usually, the best matches for Helical Piers are light loaded areas like structures with vinyl siding or porch columns. Moreover, helical piers are the most all-round and underused products in the market in these days.
Secondly, we have the Steel Piers. The launching of the steel piers actually restructured the process of foundation repair. When implemented, steel piers do not disturb a lot of landscapes and take less time as compared with the traditional concrete piers. Steel piers have no evolved and become more specialized to install.
Third is the High Density Polyurethane Foam. With High Density Polyurethane slab restoration is simplified. Foundation Repair Contractors inserts or injects the foam in a checkerboard grid that is approximately seven feet on the center of the moved area. Also, High Density Polyurethane became popular in the market in these days because of the repair speed and cost it offers. But the thing is, the consumers must also remain cautious and careful if the Heating, Ventilation, and Air Conditioning ducts runs through the bottom because the foam might enter and obstruct them. There is also a need for the consumers to do plumbing test to ensure that there are no leaks in the supply or drain lines.
The fourth method is the Concrete Pier Foundation Repair. Foundation Repair Contractors usually use poured in place concrete piers in the initial construction phase of structures. But, these can also work well with foundation repairs. This was the best method of foundation repair before the introduction of the hydraulic driven steel pier.
Fifth is that we have the Segmented Pier. This is relatively one of the latest existing products in the industry. This product for foundation repair is well liked since it offers a low price.
Attributed by: learn the facts here now